IPv6 Firewall Rules for the TP-Link TD-W8980Router Sceenshot

Back to the TP-Link TD-W8980



Screenshots from PortForward.com


TP-Link N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No. TD-W8980 0.6.0 0.6 v000e.0 Build 130131 Re.3962n Status Quick Setup Operation Mode Network DHCP Server Dual Band Selection Wireless 2.4GHz Wireless 5GHz USB Settings Route Settings Forwarding Parent Control IPv4 Firewall IPv6 Firewall IPv6 Tunnel Bandwidth Control IP & MAC Binding Dynamic DNS Diagnostic System Tools IPv6 Rule IPv6 LAN Host IPv6 WAN Host IPv6 Schedule IPv6 Firewall Rules This device can restrict the internet behaviour of certain IPv6 LAN hosts. You can set flexible combined rules by selecting proper "IPv6 LAN Host", "IPv6 WAN Host" and "IPv6 Schedule" to conduct powerful internet access control management. Enable IPv6 Firewall Default Filtering Rules Allow the packets not specified by any filtering rules to pass through the device Deny the packets not specified by any filtering rules to pass through the device Note: The modem router will first try to match the packet with the enabled filtering rules one y one in the list and apply the first matching rule. If the packet is not specified by any filtering riles in the list, then the Default Filtering Rule will take effect. Save Description IPv6 LAN Host Target Schedule Rule Status Edit Add New Enable Selected Disable Selected Delete Selected
Home > Screenshots > TP-Link > TD-W8980 > IPv6 Firewall Rules