IPv6 Tunnel for the TP-Link TD-W8980Router Sceenshot

Back to the TP-Link TD-W8980

Screenshots from PortForward.com

TP-Link N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No. TD-W8980 0.6.0 0.6 v000e.0 Build 130131 Re.3962n Status Quick Setup Operation Mode Network DHCP Server Dual Band Selection Wireless 2.4GHz Wireless 5GHz USB Settings Route Settings Forwarding Parent Control IPv4 Firewall IPv6 Firewall IPv6 Tunnel Bandwidth Control IP & MAC Binding Dynamic DNS Diagnostic System Tools IPv6 Tunnel Note: You must reconfigure this page after rebooting the device. And you must also make sure that the WAN connection you want to use is connected before you configure the tunnel. Enable Mechanism: DS-Lite WAN Connection: No available interface. Configureation Type: Auto Manual Remote IPv6 Address: Save
Home > Screenshots > TP-Link > TD-W8980 > IPv6 Tunnel