LAN Settings for the TP-Link TD-W8980Router Sceenshot

Back to the TP-Link TD-W8980



Screenshots from PortForward.com


TP-Link N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No. TD-W8980 0.6.0 0.6 v000e.0 Build 130131 Re.3962n Status Quick Setup Operation Mode Network DHCP Server Dual Band Selection Wireless 2.4GHz Wireless 5GHz USB Settings Route Settings Forwarding Parent Control IPv4 Firewall IPv6 Firewall IPv6 Tunnel Bandwidth Control IP & MAC Binding Dynamic DNS Diagnostic System Tools WAN Settings Interface Grouping LAN Settings IPv6 LAN Settings MAC Clone ALG Settings DSL Settings IPSec VPN LAN Settings Note: If the LAN IP address or subnet mask is changed, please make sure the DHCP Address Pool and the static IP assigned by DHCP Server are in the same subnet with the new LAN IP. Group: Default IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Enable IGMP Snooping Enable Second IP DHCP Server: Disable Enable DHCP Relay Start IP Address: 192.168.1.100 End IP Address: 192.168.1.199 Leased Time: 1440 minutes (1~2880 minutes, the default value is 1440) Gateway: (optional) Default Domain: (optional) DNS Server: 0.0.0.0 (optional) Secondary DNS Server: 0.0.0.0 (optional) Save Back
Home > Screenshots > TP-Link > TD-W8980 > LAN Settings