Wireless 5GHz Security Settings for the TP-Link TD-W8980Router Sceenshot

Back to the TP-Link TD-W8980



Screenshots from PortForward.com


TP-Link N600 Wireless Dual Band Gigabit ADSL2+ Modem Router Model No. TD-W8980 0.6.0 0.6 v000e.0 Build 130131 Re.3962n Status Quick Setup Operation Mode Network DHCP Server Dual Band Selection Wireless 2.4GHz Wireless 5GHz USB Settings Route Settings Forwarding Parent Control IPv4 Firewall IPv6 Firewall IPv6 Tunnel Bandwidth Control IP & MAC Binding Dynamic DNS Diagnostic System Tools Basic Settings WPS Settings Wireless Security Wireless MAC Filtering Wireless Advanced Wireless Status Wireless Security Settings Note: WEP security, WPA/WPA2 - Enterprise authentication and TKIP encryption are not support with WPS enabled. For network security, it is strongly recommended to enable wireless security and use WPA2-PSK AES encryption. Disable Wireless Security WPA/WPA2 - Personal (Recommended) Authentication Type Encryption Wireless Password (Enter ASCII characters between 8 and 63 or Hexadecimal characters between 8 and 64.) Group Key Update Period: (seconds, minimum is 30, 0 means no update) WPA/WPA2 - Enterprise Authentication Type Encryption RADIUS Server IP RADIUS Server Port RADIUS Server Password Group Key Update Period WEP Authentication Type WEP Key Format Selected Key: WEP Key Key 1 Key 2 Key 3 Key 4 Save
Home > Screenshots > TP-Link > TD-W8980 > Wireless 5GHz Security Settings