Wireless Settings for the TP-Link TL-WR941NDRouter Sceenshot

Back to the TP-Link TL-WR941ND



Screenshots from PortForward.com


TP-Link TL-WR941ND Firmware Version: 3.13.9 Build 120201 Rel.54965n Hardware Version: WR941N v2/v3 00000000 Status Quick Setup QSS Network Wireless DHCP Forwarding Security Parental Control Access Control Advanced Routing Bandwidth Control IP & MAC Binding Dynamic DNS System Tools Wireless Settings Wireless Security Wireless MAC Filter Wireless Advanced Wireless Statistics Wireless Settings Wireless Network Name: (Also called the SSID) Region: Saudi Arabia Warning: Ensure you select a correct country to conform local law. Incorrect settings may cause interference. Channel: Auto Mode: 11bgn mixed Channel Width: Auto Max Tx Rate: 300Mbps Enable Wireless Router Radio Enable SSID Broadcast Enable WDS Bridging Wireless Setting Help Note: The operating distance or range of your wireless connection varies significantly based on the physical placement of the Router. For best results, place your router. Near the center of the area in which your wireless stations will operate. In an elevated location such as a high shelf. Away from the potential sources of interference, such as PCs, microwaves, and cordless phones. With the Antenna in the upright position. Away from large metal surfaces. Note: Failure to follow these guidelines can result in significant performance degradation or inability to wireless connect to the Router.
Home > Screenshots > TP-Link > TL-WR941ND > Wireless Settings