IP QoS for the TRENDnet TEW-436BRMRouter Sceenshot

Back to the TRENDnet TEW-436BRM

Screenshots from PortForward.com

IP QoS IP QoS Entries in this table are used to assign the precedence for each incoming packet based on physical LAN port, TCP/UDP port number, and source/destination IP address/subnet masks. IP QoS: Disabled     Enabled Default QoS:  IP Pred 802.1p   Specify Traffic Classification Rules Source: IP Address:  Netmask: Port: Destination: IP Address:  Netmask: Port: Protocol: TCP UDP ICMP         Physical Port: LAN4 LAN3 LAN2 LAN1 wlan0 vap0 vap1 vap2 vap3 Assign Priority and/or IP Precedence and/or Type of Service and/or DSCP Outbound Priority: p3(lowest) p2 p1 p0(highest) 802.1p: 0 1 2 3 4 5 6 7 Precedence: 0 1 2 3 4 5 6 7 TOS: Normal Service Minimize Cost Maximize Reliability Maximize Throughput Minimize Delay   IP QoS Rules Traffic Classification Rules Mark Select Status Src IP Src Port Dst IP Dst Port Protocol Lan Port Priority IP Precd IP ToS Wan 802.1p