ACL Configuration for the Telsec TS-9000Router Sceenshot

Back to the Telsec TS-9000

Screenshots from

ACL configuration ACL Configuration   You can specify what services are accessable form LAN or WAN parts.   Entries in this ACL table are used to permit certain types of data packets from your local network or Internet network to the Gateway.   Using of such access control can be helpful in securing or restricting the Gateway managment. Direction Select:    LAN      WAN LAN ACL Switch:      Enable   Disable    Interface: LAN WAN --> IP Address: --> WAN Setting: Interface IP Address IP Address: - (The IP represent any IP ) WAN Interface: pppoe1 any Services Allowed:      Any      web   Port:      telnet   Port:      ftp   Port:      tftp   Port:      snmp   Port:      ping       Current ACL Table: Select Direction IP Address/Interface Service Port Wan Port --> Action
Home > Screenshots > Telsec > TS-9000 > ACL Configuration