Back to the ZyXEL P-660HW-T1 v3 - eircom

---

.:: Welcome to the Web-Based Configurator::. Advanced > IP Passthrough       IP Passthrough             Active WAN IP Passthrough   You may select which computer should use the WAN IP address of the DSL Router in one of three ways:        Manually enter the WAN IP address of the DSL Router in the computer.        Enter the computer's MAC Address:        Select the computer from a list of connected computers: # Status Host Name IP Address MAC Address IP Passthrough 1 \ 192.168.1.1 \ 2 \ 192.168.1.2 \ Note : 1: After you change your WAN IP passthrough settings please either reboot this device or release and renew your DHCP lease. 2: To use WAN IP Passthrough you will need to set the firewall to either Off, Low or Custom (with the correct WAN to WAN/Router rule). 3: If you are enabling or disabling WAN IP Passthrough from the PC that will also be the IP Passthrough PC please Logout after clicking Apply .