Dynamic Routing for the ZyXEL PK5000ZRouter Sceenshot

Back to the ZyXEL PK5000Z



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Actiontec M1000 Qwest.com Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help November 2 05:14 P.M. Blocking/Filtering Access Scheduler Service Blocking Website Blocking Broadband Settings IP Addressing DHCP Settings DHCP Reservation WAN Settings DNS Host Mapping Dynamic DNS LAN Subnets --> VLAN --> QoS QoS Upstream QoS Downstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Administrator Password Application Forwarding Port Forwarding DMZ Hosting Firewall IPSec --> NAT UPnP Connection Status: Qwest Broadband 1536/896 Kbps ISP Status: Dynamic Routing (RIP) If a Gateway is set up behind the Modem in the network, consult the documentation that came with the Gateway to see what kind of Dynamic Routing is required. 1.Set the dynamic routing state. Dynamic Routing:  Enable  Disable 2. Select the dynamic routing type. Dynamic Routing Type:  Version 1  Version 2 3. Click "Apply" to save your changes. All trademarks are property of their respective owners. Copyright 2010 Qwest. All Rights Reserved
Home > Screenshots > ZyXEL > PK5000Z > Dynamic Routing