Remote GUI for the ZyXEL PK5000ZRouter Sceenshot

Back to the ZyXEL PK5000Z



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Actiontec M1000 Qwest.com Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help November 2 05:14 P.M. Blocking/Filtering Access Scheduler Service Blocking Website Blocking Broadband Settings IP Addressing DHCP Settings DHCP Reservation WAN Settings DNS Host Mapping Dynamic DNS LAN Subnets --> VLAN --> QoS QoS Upstream QoS Downstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Administrator Password Application Forwarding Port Forwarding DMZ Hosting Firewall IPSec --> NAT UPnP Connection Status: Qwest Broadband 1536/896 Kbps ISP Status: Remote GUI Remote GUI enables access into the router from a WAN connection. To access your modem remotely you will need to use https:// followed by the modem IP. 1. Select the remote GUI state. GUI State: Disabled Enabled Enabled for 15 Minutes Enabled for 30 Minutes Enabled for 60 Minutes Enabled for 12 Hours Enabled for 24 Hours Enabled for 7 Days 2. Enter the admin username and password below. Administrator Username: Administrator Password: Confirm Password: Show Password 3. Set the remote management port. Remote GUI Port: 4. Click "Apply" to save your changes. All trademarks are property of their respective owners. Copyright 2010 Qwest. All Rights Reserved
Home > Screenshots > ZyXEL > PK5000Z > Remote GUI