Static Routing for the ZyXEL PK5000ZRouter Sceenshot

Back to the ZyXEL PK5000Z

Screenshots from

Qwest Modem Configuration Qwest Modem Configuration Actiontec M1000 Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help November 2 05:15 P.M. Blocking/Filtering Access Scheduler Service Blocking Website Blocking Broadband Settings IP Addressing DHCP Settings DHCP Reservation WAN Settings DNS Host Mapping Dynamic DNS LAN Subnets --> VLAN --> QoS QoS Upstream QoS Downstream Remote Management Remote GUI Remote Telnet Routing Dynamic Routing Static Routing Security Administrator Password Application Forwarding Port Forwarding DMZ Hosting Firewall IPSec --> NAT UPnP Connection Status: Qwest Broadband 1536/896 Kbps ISP Status: Static Routing Adding routers manually to the routing table is considered static routing. If a change or a failure occurs between two statically defined nodes, traffic will not be rerouted and must wait for the failure to be resolved by the administrator. 1. Enter the static routing information below, then click "Apply". Destination IP: Subnetmask: Gateway IP: 2. Click "Apply" to save your changes.   Static Routes Destination IP Subnet Mask Gateway IP EDIT No Rules Defined All trademarks are property of their respective owners. Copyright 2010 Qwest. All Rights Reserved
Home > Screenshots > ZyXEL > PK5000Z > Static Routing