Wireless Basic Settings for the ZyXEL PK5000ZRouter Sceenshot

Back to the ZyXEL PK5000Z



Screenshots from PortForward.com


Qwest Modem Configuration Qwest Modem Configuration Actiontec M1000 Qwest.com Modem Status Quick Setup Wireless Setup Utilities Advanced Setup help November 2 05:12 P.M. Basic Settings Wireless Security Radio Setup SSID Setup MAC Authentication WPS WMM 802.1x Connection Status: Qwest Broadband 1536/896 Kbps ISP Status: Basic Settings Basic Settings is used to enable or disable the wireless radio or change the network name. 1. Set the wireless radio state. Wireless Radio:  Enable  Disable 2. Change the network name (optional). Network Name: 3. Write down the wireless settings. The settings below are required to configure wireless clients.   Wireless Parameter Setting Wireless Radio: ON Network Name: \ Security Type: WEP-64 Bits Security Key/Passphrase: \ MAC Authentication: Enabled 4. Click "Apply" to save your changes. All trademarks are property of their respective owners. Copyright 2010 Qwest. All Rights Reserved
Home > Screenshots > ZyXEL > PK5000Z > Wireless Basic Settings